Bramble Inn
What Is Garage Door Torsion Spring?

What Is Garage Door Torsion Spring?

There are normally two types of springs that are used on the garage doors. One is torsion springs and the other is extension springs. The torsion springs are positioned right above the garage door opening to balance the weight of the garage door during the opening and closing process.

These springs are secured with a strong metal shaft that normally runs inside the springs. The type of garage door springs is dependent upon the design, size, and type of garage door system. The garage door springs manage the majority of the weight of the garage door as it goes up and down.  Garage door springs are installed together with other components to make the garage door functional. They enable you to open and close a big garage door with just a single click of a button. Whenever you have some problems with the garage door springs, you should call professional garage door services like Orlando garage door spring repair to restore the performance of your garage door. 

If you really find it hard to open and close your garage door, then there is most likely a critical issue with the garage door springs system. Instead of handling it on your own, you should call a professional and certified garage door company that could do this project. The job will be riskier if you do it on your own especially if the highly stressed garage door spring is involved.

As you know, even normal garage door springs are made to keep the structure under pressure and store energy for a long time. Garage door torsion springs also have the same characteristics and pressure inside the garage door system which is better understood by professional garage door technicians so that you should leave the project to them.

Some early checkups and tests should be conducted to check the performance of the garage door such as, inspecting the tracks to find out grease formation and obstructions that could have caused the malfunctioning of a garage door. You should look for loose screws or worn-out screws that need to be tightened accordingly. But when it concerns to garage door spring replacement project, it should be done by those technicians who really know the terms and conditions of the garage door springs system. If you are interested in handling the project alone, here are some important steps you should follow.

Remember that garage door spring repair and replacement can be a dangerous project. Make sure that you have the correct replacement part in hand. There are multiple models of springs available under each category and you will have to make sure that you have the correct spring. You should release the tension from the old spring before changing it with the new ones.

Avoid touching the cable drums. You should insert a well-fitting bar into the winding cone before removing or unscrewing anything. You should place a bar inside the cone during the replacement project. Never touch the mounting brackets when springs are wound. If you have any confusion, make sure that you contact a local garage door repair company.  

 Garage Door Spring

Getting professional assistance regarding broken garage door torsion springs could be one phone call away so, don’t hesitate to call a professional garage door expert in this regard. Don’t risk yourself and your family to save a few pennies.

Back to Top